Sign in Create account

Jean Pocket Pot Holder

Introducing the Jean Pocket Pot Holder, a stylish and practical kitchen accessory that combines fashion with functionality. This innovative pot holder is designed to resemble a classic jean pocket, adding a touch of trendy flair to your cooking experience. Made from durable denim fabric, it not only protects your hands from heat but also adds a unique and fashionable element to your kitchen decor. Whether you're grabbing a hot pot from the stove or using it as a trivet to protect your countertops, the Jean Pocket Pot Holder is a versatile and practical accessory that will elevate your cooking experience. So why settle for a plain and boring pot holder when you can have one that combines fashion and function? Get your hands on the Jean Pocket Pot Holder and add a touch of style to your culinary adventures.

You will need:
  • 1 pair used jeans
  • cotton batting (is best, but not essential)
  • contrasting fabric
  • measuring straight edge
  • sewing supplies (thread, scissors, pins, machine, ect.)

Step 1 Using the straight edge, draw around the pocket of the jeans. I try to make the finished square a "normal" size, I don't like thinking too hard while sewing, so I stay to whole or 1/4 inches.

Step 2 Now we are going to cut those pockets out on the line. Just like in grade school!

Step 3 Time to size out the contrasting fabric. You are going to cut a piece of the contrasting fabric the same width, but add 4 inches to the length.

Step 4 With the right sides together, pin the edge of the contrasting fabric to the top edge of the pocket (where the opening is).

Step 5 Now you are going to stitch right NEXT to the opening of the pocket. I use my zipper foot to get right up there NEXT to the opening WITHOUT stitching it shut. Don't forget to back stitch on both sides.

Step 6 After pressing the seam you just stitched flat, you are going to match up the bottom edges of the contrasting fabric and the pocket with the RIGHT sides together. This will give you a nice boarder across the top edge.

Step 7 (Okay, I did forget the detailed picture of this step... sorry!)
In this step we are going to create the insulation to protect your hands while using these pot holders. I like to lay the folded piece from step 6 on the extra denim. My favorite combo is 2 pieces of denim with a piece of cotton batting in the middle, but you can use 4 layers of denim instead of the cotton batting. (NEVER use polyester batting, it melts!)

Next we are going to make a pot holder sandwich. On the table top you lay one piece of denim insulation, with one piece of cotton batting on top of it, then another piece of denim, topped by the contrast/pocket piece with the contrast fabric facing down. Pin a few spots to hold together.

Step 8 Next you are going to sew around the edge of the sandwich. Again, I like to use my zipper foot to get nice and close to the edge and have a nice finish. Start at the top folded edge, sew down the whole side, across the bottom and about half way up the other side. Make sure you leave yourself enough room to turn the whole thing right side out, these are thick fabrics!

Once you finish stitching this is what it should look like.

Step 9 Trim the seam allowance down to about 1/4 inch all the way around.

Step 10
Turn right side out.

Step 11
(This is Faline's torture step! Every joint project with her has one of those. A great concept idea that is hell to execute! But it's cute..) You pick off one of the belt loops from the jeans and sew it on the corner of the pot holder for a hanging loop.

Step 12 Finally, you hand sew the turning point shut for a nice finished look.

Tada!! Super cute, super easy Jean Pocket Pot Holders!

Have so much fun!!!!

Like!
Add to bookmarks
257
No comments