Sign in Create account

DIY Plastic Bottle Santa Boots Holder Tutorial

Supplies needed:

Plastic bottle (A plastic bottle for a single boot)

Fabric (Cotton scraps, felt etc)

Embellishment: Ribbons, Christmas ornaments or other themed ones

Sewing supplies: scissors, needle and thread, ruler etc.

Hot glue gun.

DIY Plastic Bottle Santa Boots Holder TutorialCut the Plastic Bottle into 3 Parts (Sada Plastic Bottle like 7 Up, MTN Dew works great on this craft)
DIY Plastic Bottle Santa Boots Holder Tutorial|


Cut the following shape as base (the length is changeable according to the diameter of the plastic bottles), measure the diameter of the bottle and cut 2x on cardboard.
DIY Plastic Bottle Santa Boots Holder TutorialPlace the cut parts of plastic bottle to ensure the size.
DIY Plastic Bottle Santa Boots Holder Tutorial|
Wrap the boot bottom with fabric. Then get prepared for the fabric for wrapping around the plastics. For the front plastic part: Measure the length from the bottom of the plastic to the edge to get the radius (measured length plus 2cm as tolerance) for the circle covering the plastic.

Sew a circle of 1cm in the middle with running stitch, pull tight and tie! Then running stitch the edge of the fabric before covering the plastic, pull tight the thread to wrap the plastic inside.
DIY Plastic Bottle Santa Boots Holder Tutorial|
Get prepared for the fabric size of rear plastic. (Size = The circle length of bottom * The Length of Height)

Wrap the plastic with cut fabric and glue.
DIY Plastic Bottle Santa Boots Holder Tutorial|
Glue all the parts together, and attach the embellishments.
DIY Plastic Bottle Santa Boots Holder Tutorial
Like!4
Add to bookmarks
1726
No comments